|
|
Yutani
grinders are ideal for grind finishing, removing paint from exterior
plates, finishing process of die-casts in maritime vessels, vehicles
and automobiles, besides general grinding operations.
These compact, lightweight grinders offer trouble- free
performance.
Because
of simple construction and long endurance with continuous use
without breakdown, the grinder is used for various purposed,
and accordingly there are various types and sixes suited for
different uses. Depending
on the speed (RPM) of the grinder they are roughly categorized
into low speed (vitrified) and high speed (resinoid).
The
rotation speed is scientifically controlled by the use of an
air regulator, with little consumption of air. During
the grinding operation, the speed is not reduced by the regulator
so that the power remains strong enough to maintain high efficiency
with suitable grinding rotation. Exhaust
noise is minimal due to special construction design employed.
When
starting up a grinder, be sure to keep speed at a low level and
gradually increase to high speed to avoid accidents. In addition,
make sure the grinding wheel cover is securely mounted during
operation. |
|
HG-38NKTS |
HG-65NYTS-2 |
SAFETY LEVER |
|
|
DIE GRINDERS (note:
Supplied with saftey levers) |
|
TYPE |
FREE SPEED |
CHUCK SIZE |
WEIGHT LBS |
LENGTH INCHES |
OUTER DIAMETER |
AIR CONS CFM |
AIR INLET
NPT |
|
HG-38NKTS |
22,000 |
1/4 |
1 |
5.9 |
1.4 |
15.9 |
1/4 |
|
HG-65NYTS-2 |
18,000 |
1/4 |
1.5 |
6.2 |
1.6 |
17.7 |
1/4 |
|
|
|
Back to Top of Page |
|
|
|
|
HG-65GLB** |
HG-65GTS -2 |
HG-75NAG |
|
HG-100GTS-S |
HG-120GTS-2 |
HG-150GTS-2 |
|
|
STRAIGHT GRINDERS High Speed,
for Resinoid Wheels (note: Supplied with safety levers) |
|
TYPE |
WHEEL CAPACITY INCHES |
FREE SPEED |
3/SHAFT
8/16SIZE |
2.2WEIGHT
LBS |
1LENGTH8.INCHES1 |
AIR CONS5.9CFM |
1/AIR
INLET4NPT |
|
HG-65GLB ** |
2-1/2X1/2X3/8 |
14,600 |
3/8-16 |
2.2 |
18.1 |
15.9 |
1/4 |
|
HG-65GTS-2 ** |
2-1/2X1/2X3/8 |
14,600 |
3/8-16 |
2.7 |
10.6 |
15.9 |
1/4 |
|
HG-75NAG ** |
3X1/2X3/8 |
12,000 |
3/8-16 |
3.1 |
11.9 |
17.7 |
1/4 |
|
HG-100GTS-2 |
4X5/8X1/2 |
9,500 |
1/2-12 |
5.1 |
14.3 |
19.4 |
3/8 |
|
HG-120GTS-2 |
5X3/4X1/2 |
7,600 |
1/2-13 |
6.5 |
15.8 |
21.2 |
3/8 |
|
HG-150GTS-2 |
6X1X5/8 |
6,300 |
5/8-11 |
8.7 |
17.4 |
23 |
3/8 |
** May be fitted with 1/4 collet assembly
Note: Some tools available with roll handle |
|
|
|
STRAIGHT GRINDERS (High Speed,
for Resinoid Wheels) |
|
TYPE |
WHEEL CAPACITY INCHES |
FREE SPEED |
SHAFT SIZE |
WEIGHT LBS |
LENGTH INCHES |
AIR CONS CFM |
AIR INLET NPT |
|
RG-00 * |
2-1/2X1/2X3/8 |
12,000 |
3/8-16 |
2.8 |
10.5 |
17.7 |
1/4 |
|
RG-0 ** |
4X1/2X1/2 |
7,000 |
1/2-13 |
7.2 |
16.9 |
24.3 |
3/8 |
|
RG-1 ** |
4X3/4X1/2 |
7,000 |
1/2-13 |
8.8 |
17.5 |
28.3 |
3/8 |
*
Supplied with lever
** Supplied with roll handle |
|
|
|
Back to Top of Page |
|
|
|
YGS-4GTS -2 |
YGS-7GTS-2/YGS-7GK-3 |
YGS-5GTS-2 |
|
YGS-180F |
|
|
YGS-10NA |
|
DISC GRINDER FOR OFFSET WHEELS(
Note: Supplied with safety levers)) |
|
TYPE |
WHEEL CAPACITY INCHES |
FREE SPEED |
SIZE |
ARBOR SIZE INCHES |
WEIGHT LBS |
LENGTH INCHES |
AIR CONS CFM |
AIR INLET NPT |
|
YGS-4GTS-2 |
4X1/4X5/8 |
13,600 |
|
5/8 |
3.6 |
9.2 |
24.7 |
1/4 |
|
YGS-5GTS-2 |
5X1/4X7/8 |
10,900 |
|
7/8 |
4.7 |
9.4 |
24.7 |
1/4 |
|
YGS-7GK-3
* |
7X1/4X7/8 |
7,600 |
|
7/8 |
7.6 |
11.3 |
31.8 |
3/8 |
|
YGS-7GTS-2 |
7X1/4X7/8 |
7,600 |
|
7/8 |
7.6 |
11.3 |
31.8 |
3/8 |
|
YGS-180F |
7X1/4X7/8 |
7,000 |
5/8-11 |
7/8 |
10 |
9.3 |
35.3 |
3/8 |
|
YGS-10NA * |
9X1/4X7/8 |
4,300 |
|
7/8 |
16.5 |
20 |
53 |
3/8 |
* Supplied with Roll Handle
Back to Top of
Page |
|
|
|
|
